- Carbon body dropper with molded-in cable interface and saddle cradle - Superlight Recourse cable with carbon remote lever and titanium bolts - 65mm drop from a hydraulically locked, air sprung cartridge, for XC/Enduro use - Stationary remote cable routing on side of post - 400mm length
Keep the flow going with Thomson's Elite Covert Dropper Seatpost, a post good enough to wear the Thomson badge. This exquisite bicycle upgrade is made of tough and light 7000 series aluminum and its cable attaches to the very bottom and uses your bike's internal cable routing to keep your frame nice and clean. Of course, the Elite features Thomson's trademark engineering and reliability with custom, best-of-the-best O-rings, bushings, and oil. Thomson's remote handlebar lever is included. It's one of the smallest, most-ergonomic ones available and it has a short throw for quick height changes to move your saddle smoothly through 5 inches of infinite travel (damped in the last 15mm for a forgiving action). Plus, the classic Thomson seat clamp allows quick and easy seat adjustments and keeps your saddle in place.
$449.95 - $479.95
Keep the flow going with Thomson's Elite Dropper Seatpost, a post good enough to wear the Thomson badge. This exquisite bicycle upgrade is made of tough and light 7000 series aluminum and boasts Thomson's trademark engineering and reliability with custom, best-of-the-best O-rings, bushings, and oil. Thomson's remote handlebar lever is included. It's one of the smallest, most-ergonomic ones available and it has a short throw for quick height changes to move your saddle smoothly through 5 inches of infinite travel (damped in the last 15mm for a forgiving action). Plus, the classic Thomson seat clamp allows quick and easy seat adjustments and keeps your saddle in place.
The internally routed post uses a mechanical lock to keep the post in place and a low-pressure air spring to return to post to maximum extension. Due to the lack of oil and static seals; the post operates in below-freezing temperatures making it a good choice for fat bikes and cold weather riding. - Hunter Head two-bolt design fits standard and 7 x 9 mm Carbon Rails - Actuation cable easily (and tool-free) disconnected with Quick Connector for easy post removal. Uses standard shifter cable and housing - Extreme changes in temperature may require a user to follow the tool-free brake reset procedure for optimum function - Adjusting the air pressure will change the return speed of the post. 20-40 psi range - Remote sold separately
Introducing the Highline: years of research, development, and rigorous testing has given rise to the world's finest dropper post and remote. Premium sealing, exclusive Igus bearing and keys, Jagwire cable, and a self-contained hydraulic cartridge deliver industry leading quality and reliability. The Highline features the world's most ergonomic remote: unique spherical adjustment, with near-infinite rotation and tilt customization options, for perfect cockpit ergonomics. Specs: Setback: Zero Length: 345mm (100mm travel)/ 395mm (125mm travel)/ 465mm (160mm travel) Material: 7075-T6 aluminum Minimum Stack height: 47mm Weight: 525g (100mm travel)/ 560g (125mm travel)/ 610g (160mm travel) Warranty: 3 years
Specialized's Command Post IRCC, offers Cruiser Control technology. With ten micro-adjust positions, you'll always be able to find just the right saddle height for descending like Gwin or climbing like Sauser. - Patented mechanical locking system with the addition of Cruiser Control Technology. - Cruiser Control technology features added positions in the cruiser control range. - Bonded lightweight aluminum micro-adjustable “alien” style head. - Dual-keyway system eliminates saddle wiggle. - Energized triple-lip wiper prevents contamination. - Durable zero-gap, dual-lip x-ring internal seal ensures long-term durability. - Ships with SRL and grip mounted lever.
- Aerodynamic FACT carbon construction that’s compatible with the 2019 Venge - Sleek Di2 integration hides the Di2 junction box inside - Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt
The Turbine R dropper brings you the function and reliability you deserve with Race Face aesthetics to complete your build. - Built by Fox using the same chassis and internals as the Fox Transfer post - Features faster rebound than Fox Transfer - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Race Face 1x Lever or Universal Lever compatible - Matchmaker compatible - Remote sold separately
The TRS+ from e*thirteen is a fully mechanical dropper post focused on reliability, simplicity, and durability. This is a coil spring post with pre-set mechanical stops along it's travel range. No bleeding, no loss of air pressure or depleted nitrogen charge. And, your saddle position is rock solid, locked into place with a heat-treated cam instead of a hydraulic mechanism. The internally routed cable is controlled by a left, shifter-style lever that is best suited to 1x drivetrains. - 4 pre-set travel positions - Shifter-style remote is SRAM MatchMaker compatible, fully weather sealed, and uses a cartridge bearing at the lever pivot - Shop-serviceable with common tools: No oil or air pressure needed - Cable head is at the bottom of the post, clamped at the remote for easier removal during maintenance or shipping - Double bolt clamp: fits both standard and 7 x 9mm carbon rails - 5-Year warranty
ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities. - Material: Carbon Fiber - Hardware Material: Titanium - Saddle Angle Adjustment: 0 – 27 degrees - Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails - Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm - Torque Spec, Seatpost Collar: Determined by your Frame manufacture/Seatpost Collar - Weight: 178g (25.4mm, 25mm offset), 168g (27.2mm, 0mm offset), 178g (27.2mm, 25mm offset)
ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities. - Material: Carbon Fiber - Hardware Material: Titanium - Saddle Angle Adjustment: 0 – 27 degrees - Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails - Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm - Torque Spec, Seatpost Collar: Determined by your Frame manufacturer/Seatpost Collar - Weight: 210g (25.4mm), 204g (27.2mm), 204g (30.9mm), 204g (31.6mm)
Salsa's Regulator Ti Seatpost delivers the maximum comfort and performance of titanium, along with the convenience of independent adjustment of saddle angle and fore/aft positioning. This post is built for the long haul with specifically designed, stainless steel bolts, as well as CNC'd aluminum head internals and saddle clamps to provide the ultimate in strength and durability. - 3/2.5 titanium with a brushed finish - Length: 410mm - Proprietary head design allows independent saddle angle and fore/aft positioning - Small, lightweight head design uses CNC-machined AL-6061 internals with stainless steel threaded stud to prevent thread stripping - CNC-machined AL-7075 saddle clamps - Specially designed, stainless steel bolts provide ultimate strength and durability *NOTE: Not for use with carbon seat rails or ovalized seat rails
Zipp's SL Speed Seatpost has become a favorite of pro road and cyclocross racers because of its light weight and dependability. - Titanium hardware; black, red and white nut retainers included - Minimum insertion length is 100mm - Dual-bolt, low-profile micro-adjust cradle - UD carbon post, head, and clamps
Syntace's HiFlex full carbon seatpost is centered around a highly technical carbon design that evenly distributes rider load as well as damps vibrations without loss of control. Its extra-deep 52mm bottom clamp offers optimal rail support while a shallow 30mm top clamp allows for extra fore-aft adjustment. The two-bolt micro adjust clamp offers precise saddle angle adjustments and features bolts arranged in line with the direction of bump forces for increased strength Ideal for anything from road to mountain. - Improved vibration damping and directional stability - Bob-damping mechanism for full suspension bikes - Compatible with most Carbon rails - Weight: 212g - Max. Height: 310mm - Min. Height: 40mm
$180.00 - $225.00
Light, high-tech and comfortable, Specialized's S-Works Carbon Seatpost will improve your ride. It's built of Specialized's FACT carbon for a feathery weight and impressive strength and durability. Plus, the post features a cylindrical head assembly that's simple to adjust fore/aft and tilt with a single bolt. The S-Works seatpost comes in a 400mm length with zero or 20mm setback, as well as a 350mm length with 20mm setback.
The Specialized CG-R seatpost extends the concept that “Smoother is Faster.” This revolutionary post features 18mm of vertical compliance, Zertz vibration damping, and FACT carbon construction. The CG-R delivers unsurpassed comfort, control, and efficiency without adding weight or complication to the frame. No matter what surface your ride takes you on, the CG-R will make it better. - Revolutionary design allows 18mm of vertical compliance. - FACT carbon construction blends durability and comfort. - Vibration-damping Zertz for increased comfort. - Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt. - Diameter: 27.2mm
The smooth and sleek design of the patented SideBinder clamp makes the Ritchey WCS Carbon 1-Bolt a sophisticated choice to finish off a performance-oriented build. The beauty of this carbon masterpiece lies in the simplicity of the design of the wide clamp head. Secured with a single 5mm bolt, this post offers ease of adjustability while relieving stress on saddle rails. - Monocoque carbon construction - Available in 27.2 & 31.6mm diameters - Available in 350 and 400mm lengths - 7x7mm saddle rail clamp included - Interchangeable clamps available for all different carbon rail sizes - Saddle clamp torque spec: 12Nm - Matte UD carbon finish - 185g (27.2/350)
$164.00 - $175.00
Cane Creek's Thudbuster Seatpost adds comfort to any hardtail bike. Using a parallel-linkage design, the Thudbuster moves down and back at the same rate as the rear wheel moves forward and up when you hit a bump, helping you maintain control. The post and linkage is made of aluminum with Teflon coated steel bushings so you know it's built to last. And, the interchangeable elastomers (sold separately) can be easily exchanged to your preferences.
Since the introduction of Zipp's line of Service Course SL components, they've had amazing success with pro-level athletes in all disciplines. While the successes have been coming, they've also drawn from riders' feedback. Zipp not only learned how and why athletes make their equipment choices, but how manufacturing methods and materials affect product performance. With new knowledge as well as new engineering, they're proud to introduce a completely redesigned Service Course SL seatpost with a carbon tube and aluminum head for better shock absorption and weight savings. - Lightweight clamping system - Updated carbon tube material
The newly redesigned EC70 Seatpost takes our superlight unidirectional carbon and applies our patent pending ISA technology - Independent Saddle Adjustment - which allows for completely independent fore-aft adjustment and saddle adjustment. With the 2 pitch adjustment bolts, the saddle angle gets locked into place as if you were adjusting limit screws, and unlike single bolt designs, you get adjustability and security. Available in 20mm Setback and Zero configurations. - Finish: Matte Black UD Carbon/Matte Black Head - Weight: Zero offset, 210g; Setback offset, 223g - Head offset: 0mm; 20mm - Length: 350mm w/ 80mm min. insert - Quill size: 27.2mm - Rail clamps: 7mm round; 7mm x 9mm oval (both included) - Material: EC70 carbon
The name says it all: Thomson's Masterpiece Seatpost combines the best materials, exceptional strength, perfect function, light weight and the classic beauty of all Thomson products. All Masterpiece posts are extruded and then painstakingly machined from a single block of ultra-strong 7000-series aluminum, and they all weigh less than 200 grams complete. This means you get a post tough enough for any ride on or off road and at a nice and light weight that will complement your dream bike. What's more, you get Thomson's easy-to-adjust and super reliable 2-bolt seat clamp that makes it a breeze to dial in your perfect seat position from minus 5 degrees to plus 29 degrees.
Specialized's Shiv Carbon Seatpost is crafted from Specialized's FACT carbon for a premium blend of ultra lightness, outstanding power transfer and vibration damping. And, its single-bolt clamp holds fast and makes seat adjustments easy. The Shiv Carbon Seatpost only fits Specialized Shiv bicycles.
- Nice looking seatpost is built to the highest standards for function and ease of use - Head and shaft are made from a special high strength 2024 aluminum alloy - Two bolt head offers roughly 15 degrees of tilt adjustment - 26mm clamp setback. 320g - Made in the USA
- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post - Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head - Angled clamp bolts allow easy tool access for hassle free adjustment and tightening - The rubber seatpost grommet fully seals the post to prevent water entering your seat tube - Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon - Wide lower cradle gives extra rail support for lightweight saddle rails - Narrow upper cradle increases the amount of forward/back saddle adjustment - Tilt Adjustment 6° up 12° down with Zero offset
Zero25 is a lightweight, universal seatpost with a twist: it’s two seatposts in one. The two clever, reversible saddle rail clamps transform the post from zero saddle setback to 25mm setback. All that’s needed is to flip the clamps from one side of the seatpost head to the other and the offset changes. No more problems with getting the wrong seatpost or needing another one when you change the type of saddle you use – it now takes 30 seconds to transform your seatpost. And the best news is that despite the double functionality, the Zero25 is even lighter than our previous seatpost. Zero25 Pro has an alloy pillar and comes in two diameters, 27.2mm and 31.6mm, and one length, 350mm.
Our new EA90 seatpost applies our patent pending ISA saddle adjustment allowing for independent seat angle and fore-aft movement, helping you refine your positioning without needing to undo your rail clamps for each minute tweak. Saddle angle is then locked in place so you have the confidence your saddle will stay put after you find your fit. - Finish: Black anodized - Weight: Zero, 295g; Setback, 268g - Head offset: 0mm, 20mm - Length: 350mm w/ 80mm min. insert - Quill size: 27.2mm - Material: EA90 alloy
Thomson's Elite Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.
Thomson's Elite Setback Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.
The Salsa Guide Carbon Seatpost is lightweight, durable, and supportive when you need it most. - Carbon shaft - Bonded Aluminum two-bolt head
Seatposts can be an overlooked part of the bike, but at Whisky Parts Co., everything gets the same attention to detail so your ride never suffers. Their seatposts are made from the highest quality carbon, ensuring they are durable, lightweight, and comfortable. Whether you’re remounting during a cross race or abusing them on the trail, you'll be glad you have the No.7. - Carbon shaft absorbs trail chatter - UD carbon shaft, forged aluminum head
Page 1 of 3 Next page