Add even more cargo space to your pickup with Thule's Xsporter Pro Multi-Height Aluminum Truck Rack. This system attaches to the sides of the pickup bed, creating a whole other level of gear storage and rack options. Superior aerodynamics reduce drag and improve your fuel efficiency while Thule's WindDiffuser technology offers super quiet on-the-road performance. All-aluminum construction resists rust and provides high strength, so you'll get a lifetime of hard use out of this rack. The system also includes four matching lock cylinders to secure your gear.
The first load-assist mount to handle both SUPs and kayaks makes loading and unloading heavy boats and boards a breeze. The lightweight mount tilts down more than two feet from the roof rack, takes on up to 45% of the boat’s weight, then helps gently raise it up to the top of the vehicle. Once loaded, it securely cradles your boat or boards for the ride. At only 21 pounds, it’s super lightweight but built burly enough to wrangle an 80 pound load. Product details: - Easily load and unload kayaks and boards at waist level at the side of the vehicle with the easy to use slide and tilt mechanism - 80 lb. boat and board capacity easily handles a large kayak or two boards - Universal mounting hardware fits most roof racks - Lightweight materials and construction don’t eat up roof’s carrying capacity - Tilts down a lengthy 26" from roof rack height - Provides 30-45% weight assistance (depending on boat width) - Felt-covered cradles flex to conform to hull for secure transport - Folds down flat to reduce drag and noise when not in use - All tie-down straps included - Locks to base rack with SKS Lock Cores for added security (sold separately)
The LoadWarrior is the perfect accessory to boost the carrying capacity of your Yakima roof rack, plus it fits many other racks, too. Ingeniously, bike mounts attach directly to the basket to make carrying bikes easy, too. This cargo carrier is big enough to handle all your gear. The LoadWarrior even comes with a custom fairing that cuts wind drag and noise.
The FatCat EVO is Yakima's sleekest, quietest, and sweetest ski and snowboard mount. It is wide enough to carry six pairs of powder skis – up to 136mm at the tip – or four snowboards. FatCat EVO mounts tool-free on virtually any roof rack. The HangOver clamp attachment point makes it easier to reach your skis or boards. SKS locks are built in for added security.
Thule's Canyon roof basket gives you additional storage space while still allowing your gear to be easily accessible. With its robust, tubular steel design, it is ideal for hauling gear of all shapes and sizes. And, an included wind faring helps air flow over your cargo for less noise and better mileage. You can also fit accessory crossbars (sold separately) to your Canyon to mount bikes, ski racks, and other accessories. The Canyon mounts to all Thule rack systems, as well as round bars and most factory racks.
Sleek, aerodynamic ski rack for all types of skis and snowboards. - Holds skis and snowboards securely with ultra-soft rubber arms that grip without scratching the surfaces - Safely carries thicker modern skis and snowboards and reduces the carrier height when unloaded with an integrated vertical spring system - Easy to open and close while wearing gloves, thanks to an oversized push button - Added roof clearance for skis with tall bindings, thanks to included extension feet that raise the carrier - Fits Thule rack systems, round bars, and most factory racks with both T-Track and SpeedLink around-the-bar mounting options - Holds up to 6 pairs of skis or 4 snowboards Technical specifications - Dimensions: 34.2 x 2.8 x 3.9 inch - Loading width: 29.5 inch
Thule's AeroBlade Edge (Flush Mount) is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles without a factory rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. These flush-mount feet will need a fit kit for your specific vehicle (sold separately).
Thule's AeroBlade Edge is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles with a factory roof rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The feet fit your vehicle's roof rails without a fit kit and they're T-track compatible as well.
Versatile water sport carrier that can transport either kayaks or stand-up paddle boards with one system. Features - Multiple ways to carry: Single kayak in J-style or saddle configuration, two kayaks in stacker mode and up to two SUPs in saddle mode - Maximum protection of kayaks and stand-up paddle boards thanks to the thick rubber saddles and padded upright - Easily manage load straps while strapping down the kayaks using the integrated StrapCatch (two sets of load straps with BuckleBumpers and bow and stern tie downs included) - Quickly folds down flat when not in use for better aerodynamics - Fits all rack systems with the universal mounting hardware and quick to install with no tools required - Accommodates kayaks up to 36" wide and a maximum kayak weight of 130 lbs Technical specifications - Load capacity: 130 lb - Dimensions: 32 x 7 x 19 in - Weight: 20 lb - Rubber cover for strap buckle - Length of straps: 2x15' Fits the following Thule crossbars: - WingBar Evo - AeroBlade Edge - AeroBlade - SquareBar - ProBar
Sleek, aerodynamic ski rack for all types of skis and snowboards. - Holds skis and snowboards securely with ultra-soft rubber arms that grip without scratching the surfaces - Safely carries thicker modern skis and snowboards and reduces the carrier height when unloaded with an integrated vertical spring system - Easy to open and close while wearing gloves, thanks to an oversized push button - Added roof clearance for skis with tall bindings, thanks to included extension feet that raise the carrier - Fits Thule rack systems, round bars, and most factory racks with both T-Track and SpeedLink around-the-bar mounting options - Holds up to 4 pairs of skis or 2 snowboards Technical specifications - Dimensions: 24.4 x 2.8 x 3.9 inch - Loading width: 19.6-inch
Thule's Foot Packs are the "feet" that attach to your vehicle's roof and allow you to then add Thule crossbars (also called "loadbars"), plus the Thule bicycle mounts and accessories required to carry all your gear (crossbars, mounts and accessories sold separately). All mount without tools, are vinyl-coated so they can't damage your 4-wheeler, and are engineered to hold fast under all conditions. They have wide bases for excellent support no matter how many bicycles you carry, and most are sealed from the elements to protect the internal mechanism.
Thule's Foot Packs are the "feet" that attach to your vehicle's roof and allow you to then add Thule crossbars (also called "loadbars"), plus the Thule bicycle mounts and accessories required to carry all your gear (crossbars, mounts and accessories sold separately). All mount without tools, are vinyl-coated so they can't damage your vehicle, and are engineered to hold fast under all conditions. They have wide bases for excellent support no matter how many bicycles you carry, and most are sealed from the elements to protect the internal mechanism.
Yakima's Q-Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The Q-Towers automatically adjust to fit your vehicle's roof contours and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
Thule's AeroBlade Load Bars are the strong, silent type. Using a sophisticated BoxBeam construction, they're some of the strongest load bars on the market with a capacity of up to 165 pounds. That's the strong, now for the silent: In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The bars are easy to use, too, thanks to Thule's SmartSlide sytem that makes installation hassle free and their SwingBlade technology that allows full access to the T-slot for easy accessory additions.
Upright bike carrier for the quickest, most convenient mounting – for bikes up to 44 lbs. - 2 One Key lock cylinders (sold separately) lock the bike to carrier and carrier to rack. - Mounts to all Thule rack systems, round bars and most factory racks - Automatically positions your bike when you secure it, thanks to the uniquely designed frame holder and wheel tray - Quick and easy bike securing – the torque limiter dial controls the force going into the bike frame with a clear sign of correct mounting - Pressure is spread via large, soft claw pads that adapt to your bike’s frame tubes – minimizing the risk of frame damage - Safe mounting – your bike is prevented from falling thanks to the claw’s extended lower jaw - Stable wheels – firmly fixed in smartly designed wheel holders with diagonal quick-release wheel straps - Easy, tool-free interface for switching carrier from one side of your car to the other.
The Thule Circuit Fork Mount low-profile carrier is designed for those looking for security, convenience and aerodynamic styling. - AeroHead low-profile reinforced head combines aerodynamics, durability and style - SecureSkewer for fast loading and security w/ Thule’s One-Key lock cylinder (sold separately) - Tool-Free universal mounting makes it simple and easy to install - Integrated wheel cradle high-wall design provides protection and perfect fit beneath your wheel - Low profile aluminum tray made from corrosion-resistant aluminum to withstand the elements - Ratcheting wheel strap quickly secures back wheel to tray - Fits most factory supplied rack systems - Works with 15mm, 20mm and lefty forks with adapter (sold separately)
This standard J-style cradle delivers superior carrying performance and protection with its 4-touchpoint adjustable padding and rust resistant steel design. - Steel design with adjustable padding for carrying strength and kayak protection - Quick on/off hardware ensures fast installation and removal - Wide mouth J-profile offers easier loading and unloading - Optimally sized J-style carrier leaves roof space for other Thule accessories - AllSurface rust-resistant coating and hardware for longer product life - Carries 1 kayak and requires 1 person to load and unload - 1 to 4 carriers per vehicle - Includes all straps to transport 1 kayak - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Primary watercraft: Kayak
Thule's Traverse Short Roof Adapter enables installation of a rack system on 2-door cars or cars with short roofs. It increases the stability of your rack and gear which means you can safely carry more equipment. It's designed for use with the Traverse Foot System and Rapid Aero or square crossbars.
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
- Securely carries both road and mountain bikes QR and thru-axles - Includes interchangeable inserts for QR axles (9mm) and thru axles (12mm, 15x100, 15x110) - Fat Bike compatible with optional accessory (Sold separately) - No frame contact means no damage to carbon fiber and custom paint jobs - Optional SKS locking package secures mount to vehicle, bike to mount (sold separately) - 1 bike, 40lbs capacity
Heavy-duty aluminum load bars with a unique tri-slot design for fitting of multiple accessories. - Flexible tri-slot design allows use of a range of load accessories independently or in combination - Upper and rear T-tracks are for fast installation/removal of accessories, lower T-track is for connection to roof - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 175cm = 69-inch - 200cm = 79-inch
Transport your bicycle quickly and safely with this lockable fork mounted carrier. Not compatible with Thule Aeroblade bars. - Easy-to-use stainless-steel skewer with oversized lever makes for secure loading and unloading - High-strength nylon composite head - Ratcheting wheel strap quickly secures back wheel to tray - Versatile design compatible with standard 9mm axles and most disc brakes. - Carries bikes with wheelbases up to 48" and tire widths up to 2.6". Even works with high profile rims - Carries 1 bike - 1 One-Key lock cylinder (sold separately) locks the bike to carrier and carrier to rack - Fits Thule rack systems or other round bars - Factory rack compatible with Thule Ride-On Adapter (sold separately)
RockyMounts' TieRod is a fantastically simple and elegant option for attaching a fork mount roof rack to your vehicle's factory crossbars. Not only will you be impressed with its easy, secure operation, you'll be thrilled with how well the rubber coated stainless steel straps perfectly hug the roof racks on your car. Plus, with RockyMounts locks (sold separately) you can lock the rack to your vehicle and your bike to the rack.
Thule's Load Bars are a rock solid rack solution that come in 4 different widths to fit a huge range of vehicles.
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
Yakima's LoadStop brackets prevent your loads from shifting side to side, without having to stuff a whole bunch of folded-up blankets onto your roof. FEATURES: - Carries ladders and lumber with sturdy L-shaped brackets - Safely holds loads by preventing lateral shifts with grippy ribbed surface - Holds thicker, taller loads with a higher vertical edge - Compatible with Yakima crossbars only - Works well when paired with Heavy Duty Straps (sold separately) - Set of 4 brackets
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Yakima's Universal Mighty Mounts are a simple way to install Yakima accessories on your car's factory racks. The universal design fits almost all factory crossbars.
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Bar adapter that allows you to run RoundBar on StreamLine Towers.
Page 1 of 2 Next page