Power & Precision - The very essence of LOOK in a frame: integration and innovation at the highest level, for unmatched control. C-Stem handlebar stem, HSC7 fork, HeadFit 3 headset, EPost seat post, and above all ZED 2 crankset for maximum power transfer, the 695 is the high-performance frame. 695 SR (Super Rigid) will meet the expectations of racing cyclists looking for maximum transmission of their effort.
LOOK 695 - A frame offering unequalled cycling precision thanks to the integration of the stem, the headset, the fork and an exceptional performance thanks to its crankset. The 695 puts the CFD (Continuous Fibre Design) in application : the shape of the tubes is studied so that the carbon fibres work along the best axis, optimizing their mechanical performance. The ZED 2 crankset, the frame’s nerve centre, is the culmination of 5 years of research, was tested by athletes and validated at the Beijing Olympics. It brings a new world record to the weight/rigidity performance.
Complete Integration Pack
For optimal effort transmission, the 695 is equipped with the best crankset presently available on the market : the ZED 2 crankset. To integrate it, the 695 has an oversized bottom bracket (Rolling bearings of 65 mm). The diagonal tube, saddle tube and stays wrap around the casing and extend without a break in shape thanks to the CFD concept (Continuous Fibre Design) optimising resistance to effort. The new HSC 7 fork, the new Head Fit 3 headset, the C-stem and the E-Post are the other components integrated with the 695 frame. They were specifically developed for that frame, to make the 695 homogenous, rigid, lightweight, stable and easy to handle.
E-Post Seatpost with Interchangeable Elastomers
1) Anti-rotation: as the E-post is not round, it is always aligned with frame’s centre line. 2) Vibration Dampening: uses replaceable elastomer blocks to help enhance ride comfort. 3) Carbon friendly tightening torque: 5 Newton/meters is enough 4) Three different density (black, red, or grey) elastomer blocks are included with each frame.
1/ZED 2 Single-piece Carbon Crankset
The ZED 2 carbon crankset that comes with the 695 is a brand new highly innovative model : It is moulded in a single piece of carbon (2 pedal cranks + axis + star = FULL SINGLE-PIECE). It reaches a rigidity / weight ratio that was not possible before. The crankset alone (with no roller bearing or chain wheel) but including the two pedal cranks and the axis only weigh 320 grams! Its particular Z shape allows it to be mounted in the frame that has a specific and oversized casing (rolling bearings diameter 65 mm). The technology of the three-lobe insert at the end of pedal cranks allows adjusting the length of the cranks from 170, 172.5 to 175 mm without changing the crankset and while being compatible with all the pedals on the market.
LOOK HSC6 Carbon Fork
The 100% carbon single-piece ‘monobloc’ fork weighs only 350g (uncut) and meets the NEW Standard EN 14781 Requirement (144 joule frontal impact). Using the same technology as the rear dropouts, the carbon dropouts are compressed at the same time the fork blades, crown and steerer are moulded. The integrated carbon conical bearing seat (45° race angle) allows for the direct fitment of the bearing, eliminating the need of an additional aluminum crown race. The HSC 6 is designed to be used with an 1-1/8’’ upper and 1-1/4’’ lower sealed bearing. The fork steerer tube is specifically shaped to be used with the new Head Fit headset sytem.
2/C-Stem Carbon Stem
The C-STEM carbon stem is designed for the 695. It adopts its tube shape called “horizontal” so as to ensure efficient cohesion between the cycling station and the frame. Owing to a new patented tightening system this stem is slightly inclinable (from -9° to +13°). This avoids adding many spacers that lessen the bike’s lateral rigidity and the cycling precision. Finally its ultra-light carbon body and its titanium screw give the C-STEM great rigidity for a weight of only 160 grs.
LOOK HSC 7 Fork
The HSC 7 fork is 15% more rigid and 16% lighter than the HSC 6. 100% single-piece carbon, weighing only 295 grs and complying with standard EN 14781(Frontal shock of 144 joules). Moulded carbon tabs, compressed in the continuity of the fork. Tapered pivot using the CFD concept (Continuous Fibre Design) allowing the positioning of the rolling bearing directly on the fork’s head. Oversized ½ inch rolling bearings. The fork pivot contains 2 flat sections and is reinforced to receive the Head fit 3 headset.
There are currently no reviews for this product. Be the first to write a review.Write A Review