Our Hydration and Repair carriers have often been copied, but like any copy, it is never as good as the original.  With over a decade of experience designing these carriers and winning more Ironman World Championships than all our competitors combined, we have launched the first of the next generation of Xlab Hydration Carriers.  Already endorsed by Michelie Jones, the 2007 Ford Ironman World Champion, this new ‘wing’ will be on winning race rockets for the next several years.

Rear carriers should not interfere with the air on the rider’s back, but instead fill in the turbulence ‘hole’ behind the riders posterior, thereby reducing the rider’s drag  (which accounts for 64% of energy used on a racing bicycle).

We wanted the next generation of carriers to solve the problem of storing keys, cell phones, cash, tire levers, and other essential items.  These and other items can be stored in the Xlab X Mini Rear Tool Bag which drops vertically and easily into the rear ‘luggage compartment’ and is secured by the top X-Strap.   

As you can see below, you have two choices for storing your CO2 cartridges and X-Inflator, or Xlab Speed Chuck on the rear of the Carbon Wing, using the optional hexagonal X-NUT or in the Xlab X Mini Rear Tool Bag.

Tires and tubes are always an issue, so now you can attach them neatly under the Carbon Wing either inside the X Tire Tubular Bag or without the bag.

With the new Carbon Wing you can use a single X-Cage Carbon Boa Supergrip bottle cage on the rear or one on each side.  These cages have no restrictive protrusion where the bottle enters the cage, instead the bottles are held in place with 4 proprietary X-Grip teeth between the two mounting screws. 

One of the key features invented by Xlab is the dual mounting holes for the saddle rail clamps. One position sets the bottle cages close to vertical and the other inclines the cages for rider preference. Because of it's past success, we have kept the same feature in the Xlab Carbon Wing for customizing the installation.

We use the latest carbon fibre composite with a special lay-up and resins to provide the toughest carbon carrier on the market. Without hardware the Xlab Carbon Wing weighs only 55 grams, excluding hardware.

The bottom line—simply the most versatile Hydration and Repair system carrier, complete with 2 straps and all mounting hardware.  Xlab makes you faster – ask the Pros!